Anderson Laboratories, Inc.
6330 Industrial Loop
Greendale, WI 53129
 
Toll Free: 800-950-6330
Tel: 414-421-7600
Fax: 414-421-6540
 
Email: This email address is being protected from spambots. You need JavaScript enabled to view it. 
This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.andersonlabs.com
Virtual Card: Sales vCard


 

 Weld Testing Services
Anderson Laboratories provides weld qualification services in accordance with ABS, API, ASME, ASTM, AWS, ISO/EN, MIL, NACE, NAVSEA, TARDEC and other specifications.  We perform mechanical testing services including tensile, bend and impact strength. Additional testing includes non-destructive testing, hardness surveys of base/HAZ/weld zones, deposit analysis, hard face evaluation, ferrite determination and a variety of other inspection services. We also evaluate and test configurations such as pipe, groove, fillet and spot welds along with brazed joints.

Working under Senior Certified Welding Inspector (SCWI) supervision, Anderson Labs routinely analyzes a wide array of materials up to 12 inches (~300 mm) thick in steel, copper, aluminum and nickel alloys. With a proven record of short lead times, we provide our clients with fast, efficient and accurate Procedure Qualification Record (PQR) and Welder Performance Qualification (WPQ) services and reports. 

Please Contact Us for more information regarding this and other material testing services that could be beneficial to your organization.
 
Service Information Downloads Regarding Weld Testing
         
         
         
         
Inspection/Testing Services
Base Evaluation Impact Testing
CWI (Certified Welding Inspector) Liquid Penetration Visual Inspection
SCWI (Senior Certified Load Testing
   Welding Inspector) Magnetic Particle 
Deposit Analysis Magnetic Permeability
Draft Welding Documentation Metallography
   (WPS, PQR, WPQ) Peel Testing
Hardness Traverse Personnel Qualification (WPQ)
     • Macro Procedural Qualification (PQR)
     • Micro Radiographic Inspection
HAZ Testing (Heat Affected Zone) Scanning Electron Microscope (SEM)
  Ultrasonic Testing
   
Industry Standards
ABS (American Bureau of Ships) AWWA (American Water
ANSI ( American National    Works Association)
   Standards Institute)      • AWWA D-100
AIS (Aerospace Industry Standard) DNV (Det Norske Veritas)
ASME (American Society of EN (European Standards)
   Mechanical Engineers)      • EN 287-1
     • Section I      • EN 9606-2 (Supersedes EN 287-2)
     • Section V, art. 6      • EN 15614-1 (Supersedes EN 288-3)
     • Section V, art. 9      • EN 15614-2 (Supersedes EN 288-4)
     • Section VIII NAVSEA (Naval Sea
     • Section IX    Systems Command)
     • B16.34      • S9074-AQ-GIB-010/248
     • B31.1      • T9074-AS-GIB-010/271
     • B31.3 Norsok (Qualification of
ASTM (American Society for    Manufacturers of Specific Materials)
   Testing and Materials) PED (Pressure Equipment
     • ASTM A488    Directive (97/23/EC))
     • ASTM B962 (Supersedes ASTM B328) SAE (Society of Automotive Engineers)
     • ASTM B963 (Supersedes ASTM B328)      • SAE-AMS-STD-2175
     • ASTM E165 TARDEC (Tank Automotive Research,
     • ASTM E1208    Development, and Engineering Center)
     • ASTM E1209      • 12479550
     • ASTM E1219  
     • ASTM E1220  
     • ASTM E1417  
     • ASTM E1418  
AWS (American Welding Society)  
     • AWS B2.1 (Supersedes AWS D10.9)  
     • AWS D1.1  
     • AWS D1.2  
     • AWS D1.5  
     • AWS D1.6  
     • AWS D9.1  
     • AWS D14.1  
     • AWS D14.3  
     • AWS D14.4  
     • AWS D17.1 (Supersedes MIL-STD-2219)  
   
Materials Analyzed

Alloy Steel Monel
Carbon Steel Nickel Based Alloys
Cobalt Based Stainless Steel
Copper Based Steel
Hastelloy™ Tin
Inconel™ Titanium
Iron Tungsten
Magnesium Zinc